Universal chipper canter
For medium to large Reducing and Profiling lines
The chipper canter PF 19 is used in Circular saw or Reducer Bandsaw lines
and also in Profiling lines for chipping of two parallel faces on logs or cants.
The width adjustment of the chipper head supports is done by servo-hydraulic
The produced chips meet the high quality requirements of the pulp industry.
The chipper head revolutions are controlled by frequency converter as a
function of feed speed and desired chip lengths.
The chipper canter PF 19 can be fitted with either straight knives, spiral
knives or stepped knives heads.
The different head types are matched by the number of tools installed to
the speed range desired.
All heads are fitted with either pre- or post sawing circular saw rings, depending
on the purpose.
|Technical data PF19 |
|Chipper head diameter|
|Straight knives chipper head||mm||1240|
|Spiral knives chipper head||mm.|| 1260 |
|No. of main knives (Straight knives head)||pcs|| 3, 4, 6 |
|No. of spirals (Spiral knives head)||pcs|| 3, 4, 6 |
|Chipping depth per head.|
|Straight knives chipper head||mm||190|
|Spiral knives chipper head||mm||180|
|Chipping height above chain bed max |
|Straight knives chipper head, pre-sawing||mm||612|
|Spiral knives chipper head, pre-sawing||mm||505|
|Spiral knives chipper head, pre-sawing||mm||550|
|Distance between the chipper heads||mm||60 - 700|
|Ausfahrseite zum Werkzeugwechsel||mm||900|
|Feed speed||m/min.||20 - 150|
|Drive power||kW||2x75 - 2x250 (bei 1500 1/min.)|
|Machine weight with drive motors (2x132 kW)||t||13,0|