Profiling with horizontally arranged profiling heads, for variable
board position and width.
The profiling unit FR15H does per side the profiling of one side board
with horizontally arranged profiling heads. The profiling heads may
be fitted for a variable chip length up to 30 mm with 2 or 4 knives
on the tool circumference. For the production of pellet chips and for
lumber without fiber tear out and extraordinary long tool usage times
the P-System heads, developed together with LEUCO, will be used.
The horizontal and vertical positioning of profiling heads is done by
fast and high precision servo-hydraulic setworks.
Tool change access by walk-in moveable change platform.
The profiling unit FR15H can perform diagonal profiling of the boards,
relative to the transport level at full feed speed to achieve the same
recovery as an optimizing board edger.
|Log/cant length min.||m||2,4|
|Drive power profiling heads||kW|| 4 x 50 - 65 |
|Weight incl. drive motors||t|| 13 |
|Machine opening tool change||mm||950|
|Feed speed max.||m/min.||150|